Weigh food raw or dry whenever you can, and log it with the raw or dry entry. That is the most consistent way to count calories. Weighing cooked food is fine too, as long as you log it with a cooked entry. The calories of a portion do not change much in the pot. What changes is the weight: rice, buckwheat and pasta soak up water and get heavier, meat loses water and gets lighter. So the calories per 100 g are different, and mixing a dry weight with a cooked entry, or the other way round, is where the big errors come from.
A quick check: 250 g of cooked pasta is about 395 kcal. Log the same 250 g as dry pasta and the diary shows about 930 kcal. Weigh 70 g of dry buckwheat and pick the cooked line by mistake, and you record 64 kcal instead of about 240.
Calories per 100 g: dry or raw vs cooked
The numbers below are from USDA FoodData Central, rounded. The last column shows roughly how many times heavier or lighter the food gets once it is cooked, worked out from the two calorie values.
| Food | Dry or raw, kcal per 100 g | Cooked, kcal per 100 g | Weight after cooking |
|---|---|---|---|
| White rice, boiled | 365 | 130 | about 2.8 times heavier |
| Buckwheat, boiled | 346 | 92 | about 3.8 times heavier |
| Pasta, boiled | 371 | 158 | about 2.3 times heavier |
| Oats, cooked in water | 379 | 71 | about 5.3 times heavier |
| Lentils, boiled | 352 | 116 | about 3 times heavier |
| Chicken breast, roasted | 120 | 165 | about 0.7 of the raw weight |
| Potatoes, boiled and peeled | 77 (raw, with skin) | 86 | almost unchanged |
Two things stand out. Grains and legumes lose two thirds or more of their calories per 100 g after cooking, because most of the cooked weight is water. Oatmeal is the extreme case: a bowl of porridge made with water is mostly water. Meat goes the other way, and potatoes barely change, so for them the choice matters much less.
The cooked values are averages. Your rice can come out wetter or drier than the rice USDA measured, depending on how much water you use and how long it cooks. That is the main reason dry weight is more reliable: 60 g of dry rice is 60 g no matter how you cook it.
How to count grains, pasta and meat: 4 steps
- Weigh before cooking when it is your own portion. Put 60–80 g of dry rice or pasta on the scale, log it with the dry entry, then cook. This is the simplest method for one person.
- When you cook for several people, weigh the dry food and the finished pot. Say you cook 300 g of dry rice and it weighs 840 g when done (the pot minus the empty pot). Your own factor is 840 ÷ 300 = 2.8.
- Turn your cooked portion back into dry weight. Divide the cooked portion by your factor. 210 g of cooked rice ÷ 2.8 = 75 g of dry rice, which is about 274 kcal. Log 75 g of dry rice.
- For meat, use the raw weight from the package. If you roast 500 g of raw chicken breast and eat a third of it, log about 167 g of raw breast (about 200 kcal). You do not need to know how much it weighed after the oven.
If you only have a cooked weight and no factor, a cooked entry from a database is a reasonable estimate. For rice, 150 g cooked × 130 ÷ 100 = about 195 kcal. The result is less exact than counting from dry weight, but it is far better than using the dry value by mistake.
For dishes with several ingredients, the same idea applies to the whole pot: add up the raw ingredients and divide by the cooked weight. The full method with a worked example is in how to calculate calories in homemade food.


Meat and fish: why raw weight is safer
Meat loses water and some fat as it cooks, so it gets lighter. The USDA Table of Cooking Yields gives an average yield of 72% for roasted chicken breast: 100 g raw becomes about 72 g roasted. The same table shows a range of 61% to 82% in the samples, so two pieces from the same oven can lose quite different amounts of water. Ground beef with 12–22% fat, fried as crumbles, keeps about 67% of its raw weight in the same table.
That spread is why the raw weight is the better number to log. The label on the pack gives it, and it does not depend on how long the meat stayed in the pan. If you only weigh the cooked piece, use a cooked entry that matches the method: roasted, boiled and fried are separate lines in a database.
Fat that melts out and stays in the pan is a small extra error. If you pour it off, the meat on your plate has a little fewer calories than the raw entry says. Most people accept that overestimate rather than weigh the drained fat.
Common mistakes
- Weighing cooked, logging dry. The biggest error, often two or three times the real calories for grains and pasta. It makes the diary look worse than the day really was.
- Weighing dry, logging cooked. The opposite error, and the more harmful one for weight loss: the diary shows far fewer calories than you ate.
- Picking an entry without reading the name. Databases list "rice, raw", "rice, cooked" and "rice, cooked with salt" as separate items. Check the word in the name, not just the number.
- Forgetting what went into the water. Butter in the porridge, oil in the pasta water, sugar on the oats: they count on top of the grain itself.
- Changing the method from day to day. Counting dry on Monday and cooked on Tuesday with a rough factor makes the weekly numbers hard to compare. Pick one way for each food and keep it.
When you are not weighing at all
Eating out, at a friend's place or at work, you usually cannot weigh anything. Then the aim is a fair estimate, not a precise one. A cooked entry and an honest guess of the portion are enough; a photo of the plate in a calorie app gets you there faster, and you can adjust the portion if it looks off. See how a calorie counter that works from a photo handles mixed plates.
The weighed meals at home are what keep the average honest. If most of your days are weighed with matching entries, a few estimated meals will not move the weekly picture much. To see how portions fit into your day, check how many calories you need per day and the per-100 g values for other foods in the food calorie chart. A ready menu with every portion in grams is in the 1,600 kcal meal plan.