Calories Published Oct 31, 2026 · Updated Oct 31, 2026 6 min read

How to Calculate Calories in Homemade Food: Recipes and Cooked Dishes

How to calculate calories in homemade food: weigh raw ingredients, add them up, divide by the cooked weight. 5 steps and a worked chicken and rice example.

To count the calories of a home-cooked dish, weigh every ingredient raw, look up the calories, protein, fat and carbs of each one, add them up, and then weigh the finished dish. Divide the totals by the cooked weight and multiply by 100: that gives you the calories and macros per 100 g of the dish. After that, weigh your portion and multiply. Water adds no calories, so a soup or stew can weigh far more than its ingredients and still have the same total.

The whole thing takes about ten minutes the first time. The key rule is simple: ingredients are weighed raw, the dish is weighed cooked, and the two weights are never mixed.

How to calculate calories in a recipe in 5 steps

  1. Weigh the empty pot or dish and write the weight down. You will need it at the end to weigh the food without the pot.
  2. Weigh every ingredient raw as it goes in: meat, grains, pasta, vegetables, oil, butter, sauces, cheese. Grains and pasta are weighed dry. Small things count too: a tablespoon of oil is about 13 to 14 g and close to 120 kcal.
  3. Find the values per 100 g for each raw ingredient on the package label or in a food database such as USDA FoodData Central, and multiply by the weight: calories = value per 100 g × grams ÷ 100. Do the same for protein, fat and carbs.
  4. Add everything up. That is the total for the whole pot. Water, salt, spices and black coffee add nothing worth counting.
  5. Weigh the finished dish (pot with food minus the empty pot) and divide: totals ÷ cooked weight × 100 = values per 100 g. Then weigh your portion on a plate and multiply.

If you always split the dish into equal portions, you can skip the last weighing and just divide the totals by the number of portions. Weighing is more precise, because portions are rarely equal.

Worked example: chicken with rice and vegetables

A one-pot dish for four: chicken breast, white rice, onion, carrot, olive oil and water. Values per 100 g of the raw ingredients are from USDA FoodData Central and rounded.

Ingredient (raw)WeightCaloriesProteinFatCarbs
Chicken breast, skinless500 g600 kcal112.5 g13.1 g0 g
White rice, dry300 g1,095 kcal21.4 g2.0 g240 g
Onion150 g60 kcal1.7 g0.2 g14.0 g
Carrot150 g62 kcal1.4 g0.4 g14.4 g
Olive oil30 g265 kcal0 g30 g0 g
Water700 g0 kcal0 g0 g0 g
Whole pot1,750 g cooked2,082 kcal137 g45.6 g268 g
Per 100 g of the dish100 g119 kcal7.8 g2.6 g15.3 g

The raw ingredients weighed 1,830 g together; after cooking the pot held 1,750 g, because some water evaporated. A 350 g portion is 3.5 × the values per 100 g: about 416 kcal, 27 g protein, 9 g fat and 54 g carbs. If you simply split the pot into four, each portion is about 520 kcal, which shows how much an "equal" portion can differ from the one actually on your plate.

kkal.ai result screen with the calories, protein, carbs and fat of a photographed meal
A photographed portion shows its calories, protein, carbs and fat.
kkal.ai diary with the daily calorie goal, calories consumed and remaining, and protein, carbs and fat left for the day
The diary adds the portion to your day.

Raw or cooked weight: why the numbers change

Cooking does not destroy calories in any way that matters for counting, but it changes the weight. Meat loses water and gets lighter; grains and pasta absorb water and get heavier. So the calories per 100 g change while the calories of the whole piece stay roughly the same.

  • Meat gets lighter. In the USDA table of cooking yields, roasted chicken breast keeps about 72% of its raw weight. 500 g raw becomes about 360 g cooked, and the calories per 100 g rise from about 120 kcal raw to about 165 kcal roasted.
  • Grains get heavier. In USDA FoodData Central, 100 g of dry white rice has 365 kcal and 100 g of cooked rice has 130 kcal. The rice did not lose calories; it took on water and weighs almost three times more.

The common mistake is to weigh cooked rice and enter the value for dry rice, or the other way round. With rice that is an error of almost three times. Always match the weight to the entry: raw weight with a raw entry, cooked weight with a cooked entry.

Oil, frying, broth and other tricky parts

  • Oil and butter. Count all the fat you put into the pan. Part of it stays in the pan, but you cannot know how much, so counting all of it is the safer choice. 30 g of oil in the example is 13% of the calories of the whole pot.
  • Fat you pour off. If you drain fat from minced meat or skim it off a broth, the dish has fewer calories than the sum of the ingredients. You can weigh what you removed and subtract it as fat, or accept a small overestimate.
  • Soups and stews. Water and broth from bones you discard add weight but few calories, so 100 g of soup has far fewer calories than 100 g of its solid ingredients. Weigh the whole pot carefully: this is where the cooked weight matters most.
  • Bones, skin and peel. Weigh meat after trimming, or weigh the bones you throw away and subtract them. Vegetables are weighed peeled.
  • Batch cooking. Calculate the pot once and save the result per 100 g. Next time you cook the same recipe with the same amounts, you only need the cooked weight.

Common mistakes

  • Weighing pasta, rice or buckwheat cooked and entering the dry value.
  • Forgetting the oil, the butter in the mashed potatoes or the sour cream on top.
  • Weighing the dish with the pot.
  • Dividing by the number of portions when the portions are clearly different.
  • Using a restaurant or a "similar dish" entry from a database for food you cooked yourself: recipes differ too much.

Once you know the calories of your dish, it fits into the rest of your day like any other food. The guide on how to count macros explains how protein, fat and carbs add up to your daily target, and calories per meal shows how big one portion should be. To work out your own targets, use the macro calculator; for ready-made days with every dish counted, see the 1,500 kcal meal plan.

When you do not want to weigh everything

Weighing is the most precise method, but not the only workable one. If you eat home-cooked food every day, a fully weighed recipe for the dishes you cook most often plus a reasonable estimate for the rest is enough for most goals. Keeping a food diary matters more than perfect numbers for a single meal. If you are trying to lose weight, a consistent small error is less of a problem than skipping entries, because you adjust the calorie deficit by how your weight changes over a few weeks.

Frequently asked questions

How do I calculate the calories in a home-cooked dish?

Weigh each ingredient raw, multiply its calories per 100 g by its weight and divide by 100, then add everything up. Weigh the finished dish without the pot, divide the total by the cooked weight and multiply by 100 to get calories per 100 g. Weigh your portion and multiply.

Should I weigh food raw or cooked?

Either works if the weight matches the entry: raw weight with raw values, cooked weight with cooked values. For a recipe, weigh the ingredients raw and the finished dish cooked. Mixing them up is the most common error, with rice almost threefold.

How do I count calories in soup?

Add up the raw ingredients as usual, including oil and any sour cream added to the pot. Water adds weight but no calories, so weigh the whole pot of soup, divide the total by that weight and then weigh or measure your bowl.

Does cooking change the calories of food?

For counting purposes the calories of the whole piece stay about the same; what changes is the weight. Meat loses water and has more calories per 100 g cooked, while rice and pasta absorb water and have fewer calories per 100 g cooked.

Related topics:nutritionhealthwellnesscalories